Scents Soaps and Candles Liquid Crystal Soap Base is manufactured for us by the Stephenson Soap Group.
The great thing about liquid crystal soap base is that it can be used as a body wash, hand wash & shampoo base. Check out our How to Make Liquid Soap guides below:
Liquid Crystal Soap Hand Wash Guide
How To Make Hand Wash From Liquid Crystal Soap Base
Liquid crystal soap base makes a clear liquid hand wash soap base which creates a smooth creamy lather. Please follow the instructions below to make your hand wash:
-
Mix the liquid crystal soap base at a ratio of 1:4 (concentrate : water).
-
Measure out the volume of water that you need
-
Measure out the volume of Liquid Hand Wash Base that you need
-
Carefully add your Liquid Crystal Concentrate to the water slowly and stir it as you add it
-
Add your fragrance oil - this should be 1% fragrance or essential oil up to a maximum of 4% and stir when adding
-
If you want colours you can add water based colours and stir slowly - do not stir too hard to avoid foaming
-
Next thicken the base to your preferred viscosity and do this by adding fine dead sea salt (typically 6 – 8%) in a 25% water solution
It is important to remember that these instructions are guidelines – Scents Soaps and Candles strongly recommend that you carry out a small trial run before your bulk production. This is because different fragrance oils and essential oils can lead to different levels of viscosity and so you should try out which is the level that you want to achieve with your trial run.
Scents Soaps and Candles sell Liquid Crystal Soap Base in 500ml, 1Litre and 5Litres.
INCI list
Aqua
Sodium laureth sulfate
Cocamine oxide
Cocamidopropyl betaine
Propylene glycol
Sodium chloride
Tetrasodium EDTA
Citric acid Polyquaternium – 7
Methylchloroisothiazolinone
Methylisothiazolinone
Magnesium chloride
Magnesium nitrate
Appearance: Clear, colourless liquid
Liquid Crystal Soap Body Wash Guide
How To Make Body Wash From Liquid Crystal Soap Base
Liquid crystal soap base makes a clear liquid body wash soap base which creates a smooth creamy lather. Please follow the instructions below to make your body wash:
-
Mix the liquid crystal soap base at a ratio of 1:3 (concentrate : water).
-
Measure out the volume of water that you need
-
Measure out the volume of Liquid Body Wash Base that you need
-
Carefully add your Liquid Crystal Concentrate to the water slowly and stir it as you add it
-
Add your fragrance oil - this should be 1% fragrance or essential oil up to a maximum of 4% and stir when adding
-
Add 2% glycerine for extra moisture retention
-
If you want colours you can add water based colours and stir slowly - do not stir too hard to avoid foaming
-
Next thicken the base to your preferred viscosity and do this by adding fine dead sea salt (typically 6 – 8%) in a 25% water solution
It is important to remember that these instructions are guidelines – Scents Soaps and Candles strongly recommend that you carry out a small trial run before your bulk production. This is because different fragrance oils and essential oils can lead to different levels of viscosity and so you should try out which is the level that you want to achieve with your trial run.
Scents Soaps and Candles sell Liquid Crystal Soap Base in 500ml, 1Litre and 5Litres.
INCI list
Aqua
Sodium laureth sulfate
Cocamine oxide
Cocamidopropyl betaine
Propylene glycol
Sodium chloride
Tetrasodium EDTA
Citric acid Polyquaternium – 7
Methylchloroisothiazolinone
Methylisothiazolinone
Magnesium chloride
Magnesium nitrate
Appearance: Clear, colourless liquid
